some of the older 128mb PC100 chips would have problems if running as a CL=2 ( latency )check your bios and see if SPD is enabled for the SDRAM, if not enable it, also if it does show CL=2, then change it to CL=3. I wouldn't mix SDRAM with two defferent latency RE: 2T/3T if you do DISABLE SPD and set the latency to 3T and see if that helps. Sorry not much help, try one chip at a time and make sure they are both good, this would be a good time to check BIOS and see what the latency is for each SDRAM, providing both SDRAM have SPD?


------------------
Techno®