Intel Pro/100 M Mobile Driver?

**fritsauce** · April 18th, 2005, 08:35 AM

hey guys, i'm having a problem creating a Norton Ghost 7.0 enterprise network bootdisk for my Toshiba Satellite 1400.

In my device manager it show the Nic as a "intel(r) pro/100 m mobile connection", which i cannot find on the intel site anywhere.

I've tried multiple ndis drivers and still can't get anything to work. I'll do more searching on this site when i get back from work, but if anyone has a solution or can point me in the right direction you'd save me some time. thanks, Alex

**kennel** · April 18th, 2005, 11:41 AM

Have you looked on Toshiba's site? Or on the cds that came with the laptop? Those should be a good a good place to start.

**amadeus_hack** · April 18th, 2005, 06:41 PM

To use the Intel® PRO/100 M Desktop Adapter drivers...... if I am not mistaken I used to have the same adapter in a Compaq notebook and used the 100 M Desktop drivers as well.

AH

**amadeus_hack** · April 18th, 2005, 06:45 PM

http://downloadfinder.intel.com/scri...S&submit=Go%21

"MS-DOS* and OS/2* Drivers [PRODOS.EXE] (551KB) 9.2 1/12/2005 Download
ODI and NDIS 2 drivers for MS-DOS* and OS/2* for the Intel® PRO/100 and Intel® PRO/1000 families of adapters. Includes diagnostics."

AH

**fritsauce** · April 18th, 2005, 07:47 PM

i've tried using that (prodos.exe) before to no avail. i get this error:

Error: Unable to locate the nic.
the following are the possible causes:
1. the system may not support the PCI bus.
2.the NIC may not be properly installed in the slot.
3. some of the NIC resources in configuration space may be invalid.
Check for possible errors listed above and run diagnostics.
Failure: Driver did not load, NDIS environment invalid.
MS-DOS Lan Manager v2.1 Netbind
IBM Netbind version 2.1
Error: 33 Unable to bind

so that's what i get, it's the same error i get if i try and use the Ghost template intel driver. the NDIS file is the same:

E100B.DOS (E100B$)