-
July 9th, 2004, 07:40 PM
#1
Video Monitor resolution
After re-installing Windows 98 on my Thinkpad i1400 Model 420, the resolution has changed to 640 x 480 pixels.
The LCD panel is capable of 1024 x 768 pixels, but I cannot change the settings.
From the IBM website, I re-installed:
1)vftpkr8m.exe - Video driver for Windows 98/Me - ThinkPad 1400, 1500 (2621, 2651)
2) dx90update_redist.exe (DirectX 9.0b Redistributable ) required by the video driver.
Still getting only 16 simple colors!
Anyone know the solution for this?
Thanks,
Denny
-
July 9th, 2004, 08:02 PM
#2
Registered User
Welcome to WD Denny1 .
Did you look at all the driver downloads they have there ?
Start there
http://www-307.ibm.com/pc/support/si...?validate=true
and enter your info , there's about a dozen drivers for audio , video , moniters ,
so on .
Last edited by GrandDad; July 9th, 2004 at 08:06 PM.
"you can Log out - but you can never leave" : DMO
What part of WOOF don't you understand ? Wolf
-----------------------------------
(Sergeant) Private Military Strategy Consultant
FormatAndReload.com
-
July 9th, 2004, 08:10 PM
#3
Yes, I have spent literally half the day at that site!
From the IBM website, I re-installed:
1)vftpkr8m.exe - Video driver for Windows 98/Me - ThinkPad 1400, 1500 (2621, 2651)
2) dx90update_redist.exe (DirectX 9.0b Redistributable ) required by the video driver.
3) BIOS Update I (Diskette) - ThinkPad 1400, 1500 (Machine Type 2621)
4) Monitor File for Windows 98/Me/2000/XP - ThinkPad General
Still stuck with 16 colors only :-(
Thanks for responding!
Denny1
-
July 9th, 2004, 08:27 PM
#4
Registered User
In device manager, what do you show under display adapters? Do you have any devices with yellow ! or ?
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
July 9th, 2004, 08:37 PM
#5
Under Monitors AND Display Adapters:
No ! or ? by IBM ThinkPad 1024x768 LCD panel
No ! or ? under any other devices.
For thoroughness, I am noting the following, but unless the LCD panel resolution is affected by them, I do not want to tackle them now. No ! or ? by
In Device Manager:
1. Under Other Devices (! and ? at PCI Multimedia Audio Device) NOTE: Driver tab states "no driver files are required or have been loaded for this device".
2. Under Sound, video and game controllers:
a. ! at MPU-401 Compatible. NOTE: Driver File Details shows "msmpu401.vxd" installed.
b. ! at Sound Blaster Pro or compatible. NOTE: Device Status shows "The MMDEVLDR.VXD device loader(s) for this device could not load the device driver (Code2). The update wizard states the best driver is already installed (C:\windows\inf\wave.inf). It says to fix this, Update Driver. But I did not get a Win98 disc with the computer.
Thanks,
Denny
Last edited by Denny1; July 9th, 2004 at 08:47 PM.
-
July 9th, 2004, 08:49 PM
#6
Registered User
You are not showing a display adapter at all. You need to install the ALi AGP Driver http://www-307.ibm.com/pc/support/si...id=MIGR-4HT3RX Make sure you select the english (vftpixol.exe)
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
July 9th, 2004, 08:53 PM
#7
Thanks.
Going to the IBM site & will install later tonight.
Have DSL on the desktop, but will have to move it to the notebook using floppies...
Denny1
-
July 9th, 2004, 09:22 PM
#8
ALi AGP Driver http://www-307.ibm.com/pc/support/s...cid=MIGR-4HT3RX was a smaller file than I assumed, so have installed it already.
Still only 16 colors though! Is there something I should be selecting manually?
Now the Update Wizard, performs a driver file search for
RAGE MOBILITY-M AGP (English)
Then it says it is ready to install it from location "C:\windows\inf\other\atitec~1.inf."
However, it then asks for a disk labeled "ATI Windows9x display driver, disk #1...provided by your computer manufacturer."
NO disk was provided by IBM...
Should I manually choose a location for the wizard to locate a file installed by the ALi AGP driver? Several now appear in "C:\drivers\w9x\display\ATIDrive." The particular file the wizard looks for ("Atfenuxx.hlx") is not listed in that directory.
When the wizard searches automatically and cannot find the manufacturer's disk, the file it is trying to copy is "Atfenuxx.hlx" on ATI Windows9x display driver disk #1.
I hope I am not including too much information.
Denny
Last edited by Denny1; July 9th, 2004 at 09:33 PM.
-
July 9th, 2004, 09:35 PM
#9
Registered User
Originally Posted by Denny1
ALi AGP Driver http://www-307.ibm.com/pc/support/s...cid=MIGR-4HT3RX was a smaller file than I assumed, so have installed it already.
Still only 16 colors though! Is there something I should be selecting manually?
Now the Update Wizard, performs a driver file search for
RAGE MOBILITY-M AGP (English)
Then it says it is ready to install it from location "C:\windows\inf\other\atitec~1.inf."
However, it then asks for a disk labeled "ATI Windows9x display driver, disk #1...provided by your computer manufacturer."
NO disk was provided by IBM...
Should I manually choose a location for the wizard to locate a file installed by the ALi AGP driver? Several now appear in "C:\drivers\w9x\display\ATIDrive." The particular file the wizard looks for ("Atfenuxx.hlx") is not listed in that directory.
When the wizard searches automatically and cannot find the manufacturer's disk, the file it is trying to copy is "Atfenuxx.hlx" on ATI Windows9x display driver disk #1.
I hope I am not including too much information.
Denny
Yes . and point it to where ALI installed to or unpacked to .
Last edited by GrandDad; July 9th, 2004 at 09:38 PM.
"you can Log out - but you can never leave" : DMO
What part of WOOF don't you understand ? Wolf
-----------------------------------
(Sergeant) Private Military Strategy Consultant
FormatAndReload.com
-
July 9th, 2004, 09:45 PM
#10
I chose manully chose one of the .INF files, but the Wizard still asks for the "ATI Windows9x Display Driver, Disk #1" supplied by the manufacturer.
NO disk here from IBM.
Do you think I can or need to get one from their website?
Thanks,
Denny
-
July 9th, 2004, 09:50 PM
#11
No matter where I point the Wizard to, it insists on having the manufacturer-supplied disk #1...
...which I do not have, of course.
Can I get one from the IBM site?
Thanks,
Denny
-
July 9th, 2004, 10:08 PM
#12
Registered User
Cancel the update wizard. Run C:\drivers\w9x\display\setup.exe
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
July 10th, 2004, 09:51 AM
#13
THANK YOU!!
For the benefit of those who may be following this thread.
Ran setup.exe as suggested.
Selected "reboot."
Windows found "new hardware;"
self-installed "unknown monitor" software:
ALi 1621...system.
Came back up with 16 million colors ;-)
Have a great day!
Denny
-
May 27th, 2005, 10:57 AM
#14
Still Holds True!!
I was in an absolute panic. I had EXACTLY the same scenerio as above and worked hours attempting to correct it. Then I thought I would "Google" as a last resort. Found this website and this series of posts from a year ago. Did exactly as recommended (using setup.exe rather than the wizard) and I have my laptop back in full working order!!! THANK YOU!!!
-
May 27th, 2005, 06:18 PM
#15
Intel Mod
Welcome to WinDrivers, cwppwc. I'm glad you got a good result. Feel free to drop in again any time!
Similar Threads
-
By slwhited in forum Digital Imaging
Replies: 7
Last Post: April 23rd, 2008, 05:08 PM
-
By techs in forum Tech-To-Tech
Replies: 2
Last Post: November 3rd, 2001, 05:03 PM
-
By ilovetheusers in forum Digital Imaging
Replies: 6
Last Post: July 18th, 2001, 09:16 PM
-
Replies: 6
Last Post: August 28th, 2000, 10:35 PM
-
Replies: 5
Last Post: June 30th, 2000, 11:03 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks