USB 2.0 Device (iPod) only onnecting at 1.1
Results 1 to 15 of 72

Thread: USB 2.0 Device (iPod) only onnecting at 1.1

Threaded View

  1. #17
    Registered User
    Join Date
    Jan 2007
    Posts
    2
    OK, I have solved this problem with USB 2.0....I am an engineer and after experiencing it myself & reading 1,000,000 posts etc; I have finally found the answer.



    Evidently the USB connectors oxidize after time. This added resistance causes a feedback loop downgrading the USB port to 1.1 The simple fix is to take your wife's (or mom's) emery file and clean the contacts on both the thinkpad and the USB cable you are plugging in. Viola !!!!!

    Last edited by dak1640; January 20th, 2007 at 10:12 PM.

Similar Threads

  1. A7V333 USB 2.0 Issue
    By PacoL250 in forum BIOS/Motherboard Drivers
    Replies: 3
    Last Post: June 4th, 2004, 05:58 PM
  2. USB 2.0 Mass Storage Device on 2.0 Port Uses 1.1
    By geschmidtt in forum USB/Firewire
    Replies: 3
    Last Post: May 19th, 2004, 04:05 AM
  3. usb2.0 and firewire combo on laptop
    By crazyzoop84 in forum USB/Firewire
    Replies: 12
    Last Post: April 15th, 2004, 06:09 AM
  4. iPod and USB 2.0
    By cadworks in forum USB/Firewire
    Replies: 3
    Last Post: April 4th, 2004, 01:09 PM
  5. USB 2.0 mix and match?
    By techs in forum USB/Firewire
    Replies: 1
    Last Post: February 14th, 2003, 08:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •