|
-
April 6th, 2007, 02:58 PM
#1
Registered User
Frequent disconnects on D-Link router
Ever since I did a factory reset on my router (D-Link WBR-1530, I think...or maybe WBL) my Win2k box keeps showing "Network cable disconnected" then within a second or two comes back with connected. This happens over and over again. When it does, the link light on the router goes out. Since my computer will maintain a link even when powered off, I don't think its a PC issue. Thoughts?
-
April 6th, 2007, 04:37 PM
#2
Driver Terrier
Could be a cable fault, rj45 jack fault... if you have reset it then it's likely you twisted the box around with the cables still connected... thereby possibly loosening the cable in the socket or the cable in the plug.
Tried reflashing the firmware?
-
April 6th, 2007, 05:08 PM
#3
Registered User
Have you checked to see if there is a firmware upgrade.
It may well help the situation
-
April 9th, 2007, 10:21 AM
#4
Registered User
Firmware is the latest version.
Didn't have to twist anything, as the box is mounted sideways on the wall.
Different port/cable didn't change anything.
Similar Threads
-
By daleallenbaker in forum Tech-To-Tech
Replies: 5
Last Post: August 18th, 2005, 06:59 AM
-
By geejay79 in forum Networking
Replies: 10
Last Post: March 1st, 2005, 09:46 PM
-
By xShrimp in forum Internet and Networking
Replies: 4
Last Post: January 31st, 2005, 11:04 PM
-
By PacMan in forum Internet and Networking
Replies: 3
Last Post: April 14th, 2003, 10:41 PM
-
By stocks101 in forum Networking
Replies: 0
Last Post: May 8th, 2002, 07:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks