Cannon Laser Class 1060P Super G3

[tiggertoes]

Please help me find the proper driver for my dinosour.

[MobilePCPhysician]

Welcome to Windrivers. Here: http://www.usa.canon.com/html/downlo...s-lc1060p.html

[tiggertoes]

i found the driver for the printer qnd i downloaded it, but now the printer does not print. What can i do to remidy this problem?

[tiggertoes]

I am running xp pro sp 2 and the printer seams to be set up with the driver for win 2000. HELP!! too tired to kill my comp.

[tiggertoes]

I think that it would be cheaper to pqy your kids tuition then to mess with this printer/fax/scanner thinggie....lol

[NooNoo]

When you say the printer does not print
Explain exactly the steps you take to get it to print and what happens (or doesn't happen).

Can you print a test page? Start, printers and faxes, right click on the 1060p and select properties, should be a print test page button on the lower right. When it asks if it printed ok, click no if it didn't... follow the instructions in the wizard to check you have it correctly set up.

[tiggertoes]

the steps i took to setup printer...
1. i connected it to my comp...did PNP set up through WIN XP.
2. no Plug n Play item found
3. connected printer/fax/scanner/copier manualy
4. followed the steps that the wizard asked.... It asked if I had disk
5. NO I set the .inf files up in the MY DOWNLOAD file in my document files.
6. I set up the printer on a USB local port and set the printer to print directly to the printer.
7. I am able to print single page items in notpad, but not in mocrosoft office 2003 or any other files.

[tiggertoes]

i can nor get the printere to print a test page, nor am i able to get the wizard to troubleshoot the problem.

[NooNoo]

When you attempt to print from Word 2003, do you get an error message?

Uninstall the printer and disconnect the printer. Restart the computer
Double click the installation file you downloaded and follow the instructions to install it. Then connect the printer either if the software setup requests it, or after the software has been installed and you have restarted the machine and it has completed loaded the desktop (no eggtimers).

[tiggertoes]

When you attempt to print from Word 2003, do you get an error message?
NO, no error message.
1. Uninstall the printer.
2. Disconnect the printer.
3. Restart the computer.
4. Double click the installation file you downloaded.
5. And follow the instructions to install it.
6. Then connect the printer either if the software setup requests it, or after the software has been installed.
7. And you have restarted the machine.
8. And it has completle loaded the desktop (no eggtimers).

Yes, to the exact set of directions that you have layed out here.
But, I did get it to print in Windows, only if I pressed CLT+P every time. That was when i reloaded the NT driver on one printer set-up, Windows 2000 on another set-up and set up a viritual usb port along with a USB001 port for each printer icon I set up. The problem is that to combine the drivers in a build program, i.e., (dos, N.T., win 95, win 98, win ME, win 2000, TO WIN XP) the default printer setup will only print one page, and not more than one full page at a time. The default printer connection says that I have conflicting printer settings. I am clueless.
__________________

[NooNoo]

Given your other post Tiggertoes, did the all nighter fix this problem too?

[tiggertoes]

yes, as a matter of fact, I learned alot about this machine that I already knew about.....its a pile of trash....*giggles & grins*

[tiggertoes]

I did recieve one error message: when I tried to print from the default printer in office 2003 it would have a window that read, Unable to print because conflicting printer settings*shrug* Which printer set-up that was refering to i do not know.

[NooNoo]

please stop posting in two different threads about the same printer.