Cooling Advice
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 25

Thread: Cooling Advice

  1. #1
    Registered User El_Squid's Avatar
    Join Date
    Aug 2004
    Location
    Tornado Alley
    Posts
    2,079

    Question Cooling Advice

    I recently upgraded my video card to an NVidia 8600 OC with 256 Meg. I have an 120mm fan pulling air in the lower front of the case, an 80 mm fan pushing it out the back, not quite at the top of the case. The video card's GPU has a heat sink and fan, as does the CPU. I did not realize the darned card was overclocked from the factory and now I am having overheating issues with the GPU after several hours of running.

    I play some graphics intensive games, particularly CoH/CoV, so I don't want to give up the wonderful resolution. I don't have anymore places to attach more case fans. What would your sage advice be?

    Should I cut an opening for a new fan in the top of the case with my Dremel tool? Will one of those flexible internal fans, pointed at the Graphics card help? Should I upgrade my exhaust to an 120 mm fan?
    I didn't surrender, but they took my horse and made him surrender. They have him pulling a wagon up in Kansas I bet.

  2. #2
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    Personally, I'd go with a 120 mm case fan in place of the 80 mm if your case will accept it. Right now, my favorite 120s are the Scythe S-Flex series. They use Sony fluid bearings and very advanced blade design to move a lot of air at extremely low noise levels.

    The SSF21D flows 33.5 cfm at 8.7 dBA
    The SSF21E flows 49 cfm at 20.1 dBA
    The SSF21F flows 63.7 cfm at 28.0 dBA

    Life of the fans is estimated at around 150,000 hours and cost is usually in the $14-15 range. Panaflo fans are a good choice if you want even more airflow with
    somewhat higher noise. The FBA12G12L1BX flows 69 cfm at 30.0 dBA, and you can go all the way up to the FBA12G12H1BX, which flows 103.8 at 41.5 dBA. These models also use a fluid bearing system.

  3. #3
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    In-case heat is also dependant upon cpu cooler settings which vary with motherboard makers.

    Asus, for example, has the Q-Fan system which screws up lots of people because they use it without understanding that to GAME, you need to set the target temp as low as possible (in my case 52degrees C) to get max fan speed as soon as possible.

  4. #4
    Registered User Ferrit's Avatar
    Join Date
    Apr 2001
    Location
    Vancouver Island The Real Canada
    Posts
    4,952
    If you have the room arounf the video card then I would change out the stock fan/cooler for something from Zalman or Artic Cooler.
    http://www.zalman.co.kr/eng/product/...t.asp?code=013
    http://www.arctic-cooling.com/vgapartners1.php

  5. #5
    Registered User Ferrit's Avatar
    Join Date
    Apr 2001
    Location
    Vancouver Island The Real Canada
    Posts
    4,952
    Quote Originally Posted by OMGmissinglink
    Only problem changing out the stock fan is if the card becomes defective the manufacture will not warrenty the product.

    slgreib's idea 120 mm case fan in place of the 80 mm if your case will accept it, or pci slot fan IMHO your better solutions.
    Yes the 120 is a good idea.
    But try convincing the manufacturer you didnt do anything wrong when the video card burns out from over heating on the stock cooling.
    Been there done that and it isnt pretty

  6. #6
    Registered User El_Squid's Avatar
    Join Date
    Aug 2004
    Location
    Tornado Alley
    Posts
    2,079

    Thumbs up

    Many thanks for the great suggestions.
    I will definitely upgrade my case exhaust fan to 120 mm, prolly one of the more robust ones from slgrieb's list.
    I do not have an extra slot for a card type fan.
    I am not too concerned about warranties, if the card fries, I'll just buy a better, newer one, so I will look into a better fan for the GPU.
    Woo-Hoo! Now, maybe I can crank up the card to its limits! (j/k)

  7. #7
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    All too many manufacturers seem to do anything they can to avoid honoring a warranty, alright, but there are some very nice after-market video coolers out there. Thermalright makes a nice line of heatpipe coolers, including a model that mounts on the back of the card and doesn't require removal of the stock cooler. However, with any of these coolers you really need to check the dimensions against your available space. Prices are in the $24-$60 range (plus a fan in most cases). Installation is pretty simple IF you have checked our clearances.

  8. #8
    Registered User Ferrit's Avatar
    Join Date
    Apr 2001
    Location
    Vancouver Island The Real Canada
    Posts
    4,952
    All too many manufacturers seem to do anything they can to avoid honoring a warranty, alright,
    Exactly what I have found and something overheated with a fan that still spins but isnt doing the cooling job is dam hard to get warranty for.

    No matter what OMG says

  9. #9
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    BTW el tentacled one - what motherboard?

  10. #10
    Chat Operator Matridom's Avatar
    Join Date
    Jan 2002
    Location
    Ontario, Canada
    Posts
    3,778
    Just to add to the warranty argument, i know here in canada, when your dealing with the manufacturer, it can be a royal pain in the *** to get stuff across the border and back. a few years ago, i RMA'd an asus video card, the bloody thing sat in customs for a month. I would rather spend an extra $60 for better cooling and not have to RMA it in the first place.

    I went with the V1000 with the ram cooler addon from Zalman for my 8800.

  11. #11
    Registered User El_Squid's Avatar
    Join Date
    Aug 2004
    Location
    Tornado Alley
    Posts
    2,079
    Sorry CCT, didn't get a chance to crack the case this weekend, so still unsure about MoBo. The card is a BFG NVidia 8600 OC and there is no additional cooling hardware, other than the heat sink and fan already supplied, available from them.

    Slgrieb, will be opening the box tonight and will check on my clearances for a heatpipe cooler. I also need to upgrade my hardware to monitor and control heat/fans. Found some really nice ones.

  12. #12
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    Everest would probably have told you.

  13. #13
    Registered User El_Squid's Avatar
    Join Date
    Aug 2004
    Location
    Tornado Alley
    Posts
    2,079
    Quote Originally Posted by OMGmissinglink
    Have you installed NTune/ possibly fan limiting speed, contact BFG bios update , 1-866-234-3499 , searching on some forums some brands are posting new bios that increase fan speed.
    Yes, I have installed NTune. Let check for BFG upgrade and possible limitations on fan speed. Thx.

  14. #14
    Registered User El_Squid's Avatar
    Join Date
    Aug 2004
    Location
    Tornado Alley
    Posts
    2,079

    Smile Problem solved!

    This site is harzardous to my economic health. Not only did I upgrade the fan, I purchased a slot fan, 2 gigs of HyperX Ram and a new 450 watt PSU from NewEgg while I was at it. Not to mention, I also bought 4 gigs of Ram for the boys PCs.

    Your advice was effective, as upgrading the case's exhaust fan pretty much solved the problem, by creating negative pressure in the case, pumping out more air than is being sucked in. I also found several of my drivers were out of date, harumph, and spend much time upgrading stuff this weekend.

    As always, Thanks to All of the Helpful souls in WD.
    I didn't surrender, but they took my horse and made him surrender. They have him pulling a wagon up in Kansas I bet.

  15. #15
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    Greetings, oh tentacled master, but what products did you use? Just monkey curiosity.
    Last edited by slgrieb; January 24th, 2008 at 12:08 AM.

Similar Threads

  1. REVIEW: Zalman Reserator 1 Plus Passive H2O Cooling
    By TechZ in forum Case Mods & Cooling
    Replies: 0
    Last Post: August 14th, 2006, 03:23 AM
  2. Need water cooling advice
    By Radical Dreamer in forum Case Mods & Cooling
    Replies: 11
    Last Post: October 26th, 2004, 12:25 AM
  3. [RESOLVED] need advice on cooling
    By Mr. Evil in forum Case Mods & Cooling
    Replies: 4
    Last Post: October 1st, 2001, 01:33 PM
  4. cooling advice
    By Radical Dreamer in forum AMD
    Replies: 25
    Last Post: April 20th, 2001, 10:39 PM
  5. [RESOLVED] cooling fans
    By boxster in forum Tech-To-Tech
    Replies: 1
    Last Post: November 11th, 2000, 01:02 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •