Cisco ASA Firewall Config

[Auric]

Hi all!

This Firewall is starting to tick me off!

I have the two interfaces setup and configured, and enabled.

Outside is setup with one of my external IP's from my external address pool.

Inside is setup with the proper IP/Subnet pair etc.

default route setup on the outside to go for any 0.0.0.0/0.0.0.0 to the IP of the ADSL Router.

ACL is setup to allow IP traffic from any/any ip permit on the INSIDE interface.

Am I missing something??? I cannot get out to the internet.

[NooNoo]

Opened port 80? (NooNoo ducks)...

Nat working?

[Auric]

I'm not sure, traffic seems to get stopped at the NAT rule.

[mjfarrell]

Have you enabled NAT/PAT? The following command will setup PAT using the IP address of the Outside interface;

global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0

[Auric]

I ended up contacting Cisco and using my SmartNet support...what a wonderful thing! lol

[NooNoo]

And what was the problem then? Missing a . somewhere?

[Auric]

I missed something in one of the ACL rules.

[NooNoo]

Thanks. Glad it's sorted.