|
-
December 22nd, 1999, 09:19 PM
#1
 NT4 WS Setup, Network Headaches
Ok. We just got a NT4 Workstation computer at work, its mine so I have to set it up. At this point, everyone else on the LAN can see me - but I cannot see the LAN at all.
On the hub I noticed it says that I am running at 100M vs. 10M that everyone else is running (two Win9x machines and the NT Server).
I guess I am stuck, and from the drivers I found on the net for the NiC - there was no way to change the speed to 10/100 or just 10.
Yeah, I am a mess. =)
Any help is appreciated.
-
December 23rd, 1999, 07:06 AM
#2
-
December 23rd, 1999, 08:59 AM
#3
Yes those are setup. I have the same setup as the server, basically.
-
December 23rd, 1999, 09:28 AM
#4
I assume that you have TCP/IP installed since you have DNS. Have you tried pinging different nodes on the LAN? Try yourself first. From the DOS command:
ping 127.0.0.1
Then try other IP addresses.
What results do you get?
-
January 3rd, 2000, 03:04 PM
#5
Strange things happen sometimes. Got everything worked out - the NiC was stuck at 100M ... our network is only running at 10M. As soon as I got the correct software for the card .. Bwam! .. Peachy. =)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks