Asus L7200/L7300E motherboard info - Page 2
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 16 to 30 of 33

Thread: Asus L7200/L7300E motherboard info

  1. February 23rd, 2009, 10:40 AM #16
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    But what about CPU Core stepping ! Is it compatible ?
    Reply With Quote Reply With Quote
  2. February 23rd, 2009, 10:47 AM #17
    NooNoo
    NooNoo is offline
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Not enough information - the motherboard has to be compatible, not the core stepping.

    Have you figured out how to get 8x multiplier yet? That's your biggest problem.

    Have you found any other laptops containing this motherboard? What's the biggest processor that went in it?
    Reply With Quote Reply With Quote
  3. February 23rd, 2009, 11:09 AM #18
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    Have you figured out how to get 8x multiplier yet? That's your biggest problem.
    I wrote to asus, but they told my: go to asus service
    I didn't find any service manual for Asus or for Advent (the simular model with L7300 motheboard)

    The biggest CPU what I Found:
    ASUS L7300, Intel Celeron/Pentium III 650-800 Mhz
    In russian:
    http://www.price.od.ua/catalog.phtml...id_p=1&id_c=17

    I found service manual for Compal NoteBook N20U
    Intel P III Mobile Coppermine CPU 500MHz, Celeon 450/500MHz.
    Intel µPGA2 package
    FW82371(PIIX4M) for PCI IDE controller & USB interface.
    FW82443 BX Support 100MHz Front side Bus.

    Very closer (to my ASUS) but again not DIP switches for CPU.
    Reply With Quote Reply With Quote
  4. February 23rd, 2009, 11:16 AM #19
    NooNoo
    NooNoo is offline
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    All you can do is try it...
    Reply With Quote Reply With Quote
  5. March 6th, 2009, 04:23 PM #20
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    Success !

    Pentium III (SL4GT) 800Mhz - worked (without any sw modification).

    But new Toshiba DVD-ROM SD-C2202 didn't work :-( (I think this is laptop firmware problem)
    I found new bios firmware but I'm afraid update it (for desktop computer I have made it).

    What you think about bios update for laptop ? Is it hard to restore it if error will ocur after laptop restart ?

    Thank you


    ---------------L7000-E Series Notebook----------------

    -------BIOS--------
    lse0011a.exe ASUS L7000-E Series Notebook, BIOS rev. 0011 (Mar./27/2001)
    1. Support thermal override function.
    2. Update battery refresh algorithm.
    3. Fix LCD will white-out for about 4 seconds when resume from Suspend to RAM
    (only happen with Sigmatel codec).

    lse0010a.exe ASUS L7000-E Series Notebook, BIOS rev. 0010 (Oct./12/2000)
    1. Latest updates.

    lse0009a.exe ASUS L7000-E Series Notebook, BIOS rev. 0009 (Sep./01/2000)
    1. Support Sigmatel codec.
    2. Support battery refresh function.

    lse0008a.exe ASUS L7000-E Series Notebook, BIOS rev. 0008 (Aug./28/2000)
    1. Add resume from RINGIN function for ACPI OS.
    2. Fix resume from disk then restart to MS-DOS when under Win98 SE.
    3. Fix Fn+Fn function does not work.
    4. Fix Toshiba DVD-ROM SD-C2302 not found if TOSHIBA MK1016GAP hard disk is installed.

    lse0007a.exe ASUS L7000-E Series Notebook, BIOS rev. 0007 (Jul./04/2000)
    1. Leave Speedstep control to AP in NT 4.0 if AP installed.
    2. Add DMI system information version (set to 0001).
    3. Fix issues:
    a) FIR transmission fail if "IR port" set to "Auto".
    b) System hangs on restarting to MS-DOS mode.
    c) System stays with ASUS logo if hard disk password is set.
    d) If hard disk password is set after Windows 2000 resumed from S3, the display
    will turn off when entering the password.
    4. Support CardWizard in NT 4.0.
    5. Add UID for LPT.
    6. Configure CD-ROM when hard disk not installed.
    7. Soultion for "sometimes hangs on resume from disk".

    lse0006a.exe L70000-E Series Notebook BIOS ver. 0006 (10/May/2000)
    1. Change ACPI mode fan on temperature AC/DC : 60/70C --> 70/80C
    2. Solve for Fn+F1 fail when restart Windows 2000 and then boot to Windows 98
    command prompt mode only.

    ** my current **
    lse0005a.exe L70000-E Series Notebook BIOS ver. 0005 (04/May/2000)
    1. Solve for H/W icon would not disappear if power management is disabled.
    2. Support M38867 with v1.27 firmware.
    3. Solve failure to format hard disk when installing Windows 98 from CD.
    4. Reassign IRQs for PCI devices if "Installed O/S:" is Other.
    5. Solve for PCMCIA socket B not working under NT 4.0
    6. Add microcode updates for the B0-step mobile Pentium III processor and mobile
    Celeron Processor (0.18-micron) in BGA2 and Micro-PGA2 packages.
    7. Solve for Windows 98 long booting time.
    8. Set correct DMI CPU type string when Celeron CPU in used.
    9. Display CPU type (in post) the same way as other machines.
    10. Support variant panel type.
    11. Leave SpeedStep control to O/S or applet if installed.
    12. Solve for abnormal screen sometimes after Fn hot key is pressed.
    13. Solve for high microphone volume after resume from suspend if system enters
    standby before suspend.

    lse0004a.exe L70000-E Series Notebook BIOS ver. 0004 (18/Apr/2000)
    1. Report fake game port to support DDR kit.
    2. Update VGA BIOS.
    3. Modify DMI type 1 product string.
    4. Solve hard disk resume password fail after warm boot.
    5. Mute battery low beep when resume from S3.
    6. Remove blank characters from DMI strings.
    7. Simplify power status (APM mode) algorithm when Pctel modem in use.
    8. Set panel brightness to maximum when loading CMOS default setting.
    9. Modify ACPI mode battery status control method so that the capacity
    reading can be charged to 100%.
    10. Solve WIN2000 HP5L printer,Iomega ZIP250 device fail to work
    after wake up from S1.
    11. Change ACPI mode thermal control (add event notification control methods)
    Last edited by klep; March 6th, 2009 at 04:25 PM.
    Reply With Quote Reply With Quote
  6. March 7th, 2009, 08:48 AM #21
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    I updated bios (v.12) ! But DVD(I tested on dvd-rom and dvd-ram) still hasn't detected :-(
    Reply With Quote Reply With Quote
  7. March 7th, 2009, 09:13 AM #22
    CCT
    CCT is offline
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    Heya klep. What OS are you using?

    Have you tried the longshot 'fix' of cleaning the upper/lower filters?

    http://support.microsoft.com/kb/314060


    Failing that, how about ASPI layer?

    http://www.afterdawn.com/guides/archive/aspisetup.cfm
    Reply With Quote Reply With Quote
  8. March 9th, 2009, 05:54 AM #23
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    2 CCT

    without any OS , didn't detect in bios
    Reply With Quote Reply With Quote
  9. March 9th, 2009, 06:11 AM #24
    CCT
    CCT is offline
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    And this is an IDE dvd with jumper Master hooked to an 80 wire-40 pin cable on the END connector?
    Reply With Quote Reply With Quote
  10. March 9th, 2009, 06:22 AM #25
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    yes, I tested with toshiba sd-c2202 and toshiba ts-l632 (40pin connector).
    No any jumpers for master/slave ! I think he looks CS.

    May be new bios didn't update DMI information I don't know (I made all by instruction from asus)
    Reply With Quote Reply With Quote
  11. March 9th, 2009, 06:41 AM #26
    CCT
    CCT is offline
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    Apparently the toshiba sd-c2202 can be set in firmware either master or slave - try the slave connection.

    Have you checked dma/pio settings in Bios?
    Reply With Quote Reply With Quote
  12. March 9th, 2009, 06:42 AM #27
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    My notebook didn't see it, and I can't set any settings in bios (or change firmware).
    Reply With Quote Reply With Quote
  13. March 9th, 2009, 06:49 AM #28
    CCT
    CCT is offline
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    Just out of interest, have you tried the dvd on both IDE connectors (primary and secondary)?
    Reply With Quote Reply With Quote
  14. March 9th, 2009, 06:55 AM #29
    klep
    klep is offline
    Registered User
    Join Date
    Feb 2009
    Posts
    16
    No ! I can't because i have only one IDE connection for CD and another for HDD (I can't connect to it CD because it's hided in hdd cady).
    Regards.

    p.s
    I solve connect DVD as external drive through USB.
    Reply With Quote Reply With Quote
  15. March 9th, 2009, 07:07 AM #30
    CCT
    CCT is offline
    Registered User
    Join Date
    Feb 2006
    Location
    Canada, Eh!
    Posts
    4,091
    Well then, it sounds like the cd/dvd connnections or ports are disfunctional. Will the USB connection boot the install disk?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules