ethernet controller

**sweet_simon4** · March 20th, 2009, 07:03 AM

this is the report i have send in 3 4 time

**CCT** · March 20th, 2009, 07:19 AM

'i hve report but i m not able to send it error occurs by saying that too many characters short it'

Yes, because you did NOT follow my instructions ' Click on file, preferences, report and uncheck the 'include debug information in the report' box. People rarely want to see that stuff.'

So, you end up posting all that debug crap!

Anyway, your report shows you have a 2Wire Gateway USB (10.0.0.1) ethernet adapter and an internal telephone modem. It does not show any other NIC.

What make/model of adapter is that?

Did it work previosuly?

Have you installed any new software recently or re-installed your OS?

Is it wired/wireless?

**NooNoo** · March 20th, 2009, 07:32 AM

Yah it does, in the debug info! Intel pro/ve

B02 D08 F00: Intel PRO/100 VE Network Connection

**sweet_simon4** · March 20th, 2009, 07:33 AM

yes it is of two wire gateway, its of bigpond and its 2071-A. Previously i have cable internetijust have chnged my plan to adsl its wired DSL now i m using internet through usb.

**NooNoo** · March 20th, 2009, 07:34 AM

Right but the usb one is installed... the intel onboard ethernet controller is not

So what is the actual problem here? You can't get to the internet?

**sweet_simon4** · March 20th, 2009, 07:35 AM

no i didnt install anything but i think i have delete something which shows small computer on the bottom of my computer now there is nothing, i think thats why ethernet is not working.

**sweet_simon4** · March 20th, 2009, 07:36 AM

i m using internet through usb not through ethernet

**NooNoo** · March 20th, 2009, 07:39 AM

ethernet is a form of connection.

the usb uses the ethernet protocols... hence the confusion

So exactly what is the problem? You can't get to the internet? You can't connect to your wireless provider? If you can get to the internet, then the wireless is working - it's just the icon that isn't.

Please post exactly what the symptoms are.

**CCT** · March 20th, 2009, 07:40 AM

Two things:

1 - the D865GBFL has 10/100 ethernet, the D865GBF does NOT!

2 - the 2 Wire XP instructions; http://support.2wire.com/?page=view&article=224

http://www.2wire.com/pages/pdfs/USB_Driver_Windows.pdf

**sweet_simon4** · March 20th, 2009, 07:42 AM

no i have two options to run the internet usb and ethernet, by using usb net speed is very low but in ethernet speed is gud, i dont have wireless more i dont know
when i put the wire of ethernet net stops to work

**sweet_simon4** · March 20th, 2009, 07:51 AM

yes cct now that small comp are on my computer and connected

**sweet_simon4** · March 20th, 2009, 07:52 AM

but without usb it not works

**sweet_simon4** · March 20th, 2009, 07:57 AM

my computer is very slow wat can i do

**CCT** · March 20th, 2009, 08:24 AM

I am uncertain as to what help you want.

If the onboard NIC isn't diplayed in the Main Everest page, I would think it is either disabled or the drivers are not loaded. Did you want to use it? Are there any error/problem flags im Device Manager?

As to the Bigpond adapter - I get mixed info. Is that a USB etehernet adapter or a USB modem?

**NooNoo** · March 20th, 2009, 10:23 AM

Sorry Simon, you are the one sitting in front of the computer, unless you can communicate to us clearly what the problem is, we can't help much...

I mean look at what you wrote

when i put the wire of ethernet net stops to work

Which wire... where did you connect it? Does the internet stop working, or your own network?

Please state what the problem is.

Does the internet work? Yes or No?