Hp dv7-4060us
Results 1 to 12 of 12

Thread: Hp dv7-4060us

  1. #1
    Registered User
    Join Date
    Mar 2005
    Posts
    1,534

    Hp dv7-4060us

    This laptop is not booting and it shows a blinking light on the cap locks key witch suppose to mean the CPU is faulty (one blink) how reliable is this? If reliable I will get a cpu and see.

  2. #2
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    Quote Originally Posted by Kodiak View Post
    This laptop is not booting and it shows a blinking light on the cap locks key witch suppose to mean the CPU is faulty (one blink) how reliable is this? If reliable I will get a cpu and see.
    I doubt that it is reliable, so I'd try booting from the Linux distro of your choice and see what happens.

  3. #3
    Registered User
    Join Date
    Mar 2005
    Posts
    1,534
    Won't boot anything to the screen at all. fans spin up and nothing comes up.

  4. #4
    Registered User Zonie's Avatar
    Join Date
    Apr 2001
    Location
    Phoenix, Arizona
    Posts
    1,461
    Hey Kodiak, take a look at THIS and see if this helps. It could be the memory according to the forum.

  5. #5
    Registered User Ferrit's Avatar
    Join Date
    Apr 2001
    Location
    Vancouver Island The Real Canada
    Posts
    4,952
    I would connect an external monitor and try.
    I would remove the battery and try.
    I would remove the harddrive and try

  6. #6
    Registered User
    Join Date
    Mar 2005
    Posts
    1,534
    Tried all that and nothing. I even pulled the whole laptop apart and reseated the processor and nothing.

  7. #7
    Super Moderator SpywareDr's Avatar
    Join Date
    Jul 2012
    Location
    Maryland, USA
    Posts
    385
    Unless you know someone with some pretty sophisticated test equipment and knowledge of how to use it, you may have to simply start swapping in known-good components until you find a combination that works. The three basic components are the Motherboard, CPU and RAM.

  8. #8
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    Quote Originally Posted by SpywareDr View Post
    Unless you know someone with some pretty sophisticated test equipment and knowledge of how to use it, you may have to simply start swapping in known-good components until you find a combination that works. The three basic components are the Motherboard, CPU and RAM.
    I'm thinking that essentially rebuilding the computer a part at a time doesn't really have much appeal as a solution. Personally, I'd feel pretty secure in saying that if the system won't boot Linux or display a splash screen, and pulling the battery and disconnecting power for a minute didn't get the machine running, you are almost certainly looking at a dead MOBO; especially if you've tried an external monitor and it wouldn't light.

    A defective processor is pretty uncommon, but an HP laptop with a dead motherboard is about as common as a belly button. You can probably find a replacement mainboard for cheap on eBay, but it's likely to be a used board with little or no warranty.

  9. #9
    Super Moderator SpywareDr's Avatar
    Join Date
    Jul 2012
    Location
    Maryland, USA
    Posts
    385
    I agree. Motherboard first, RAM second. Unless the computer's been zapped (ESD), dead CPUs are rare.

  10. #10
    Registered User
    Join Date
    Mar 2005
    Posts
    1,534
    yeah I tried a those things Slgrieb and nota, nothing. Everything spins up and does show the HD light flashing though but nothing on the screen at all..

  11. #11
    Super Moderator SpywareDr's Avatar
    Join Date
    Jul 2012
    Location
    Maryland, USA
    Posts
    385
    Next step: Try a different motherboard.

  12. #12
    Registered User slgrieb's Avatar
    Join Date
    Feb 2003
    Posts
    4,103
    Quote Originally Posted by slgrieb View Post
    A defective processor is pretty uncommon, but an HP laptop with a dead motherboard is about as common as a belly button. You can probably find a replacement mainboard for cheap on eBay, but it's likely to be a used board with little or no warranty.
    It seems to me that most of the models in HP's DV series have been dogs. And in many models, MOBOS have been a major failure point. So, I'm not sure that replacing the board with another crappy-by-design board is the best solution. Personally, I think I'd shoot Old Yeller.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •