Computers & Magnetic Tip Screwdrivers - Page 3
Page 3 of 3 FirstFirst 1 2 3
Results 31 to 41 of 41

Thread: Computers & Magnetic Tip Screwdrivers

  1. #31
    Registered User Cygnus's Avatar
    Join Date
    May 2001
    Location
    Boca Raton, FL
    Posts
    491

    Post

    I insist upon useing magnetics, and I have never had a problem with em. Any problems they mnight give you are far outweighed by there benefits.

  2. #32
    Junior Member
    Join Date
    Jul 2001
    Posts
    4

    Post

    [quote]Originally posted by da_grinch:
    <strong>Nope, never had a problem. I just make sure the case is plugged out of the 120VAC and ground myself to the computer with a wrist strap...</strong><hr></blockquote>

    Huh? Static discharge and Magnetic fields around components are two different things.

  3. #33
    Flabooble! ilovetheusers's Avatar
    Join Date
    Nov 2000
    Location
    Downtown Banglaboobia
    Posts
    6,403

    Post

    I had a PC apart and someone asked what all the chips were for on the MOBO. I noted what they were and touched the video chip with the magnetic screwdriver to demonstrate where it was. As soon as I did it hung my head and knew what was going to happen when I booted. The video was beyond scrambled. The machine was under warranty so I took it back and said I had no idea what happened.

    I will never use magnetic devices in a PC again.

    By the way - I tried to kill a HDD one time (for the hell of it) and put huge speaker magnets on it. It was never better after the things set on it all night. Guess you never know. It still runs to this day.

  4. #34
    Senior Member - 1000+ Club Outcoded's Avatar
    Join Date
    Apr 2001
    Location
    Somewhere in the UK, never quite sure where
    Posts
    1,689

    Post

    No problems at all, I use one everyday, the internal speaker has a stronger magnet. I personally hold my spanner on a cupboard door with two hard disk magnets - a screwdriver is piss-all by comparison.

    I also tend to take lids off/put back on PC's using a cordless drill (though I don't use it inside )

  5. #35
    Registered User
    Join Date
    Apr 2001
    Location
    Europe
    Posts
    32

    Post

    Like all people, for 10 years,no problems.

  6. #36
    Junior Member
    Join Date
    Aug 2001
    Location
    Minneapolis
    Posts
    5

    Post

    Well, there is one danger with a magnetic screwdriver.

    Don't stab yourself with it. =)

  7. #37
    Registered User
    Join Date
    Jul 2001
    Posts
    91

    Post

    nope, but i'm only touching screws with it

  8. #38
    GarryK
    Guest

    Post

    I keep my magnetic screwdriver sitting next to my laptop in it's case when I'm travelling around because there's nowhere else it will fit! Been doing it for 2 years without a hint of trouble. Static electricity in us humans is infinately more dangerous to computers than good old mags!

  9. #39
    Vette2000
    Guest

    Cool

    Never had a problem either. It sure comes in handy when you realize the last screw to attach the mobo to the case has to go through between the drives and the power cables. Just remember screwdrivers are sharp instruments and can put out an eye. That makes you somewhat shortsighted!

  10. #40
    Registered User *SlyVenom*'s Avatar
    Join Date
    Oct 2001
    Posts
    1,034

    Post

    Sorry to bring back a dead topic, but...

    I've found non-magnetic screwdrivers to be detrimental to a cramped computer case,
    with nothing to hold the screw to the screwdriver the loose screw can fall down onto delicate electronics causing far more damage than,
    the weak magnatization of your screwdriver tip ever could

  11. #41
    Registered User prince_steval's Avatar
    Join Date
    Sep 2001
    Location
    Cape Town, Western , South Africa
    Posts
    34

    Post

    Well, I have been using Magnetic tip screwdrivers for ten years and never experienced any problems.

    I feel they are very useful for fitting those screws in all the weirdest places in a case

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •