|
-
January 7th, 2001, 03:40 PM
#1
 CPU runs hot
My new 665 Mhz Intel Coppermine cpu on a Intel 815E m/b triggers the heat sensors when running WinME.Running WinPRO no such problem occur.Reinstalled the M/b software and put in a 2nd fan, to no avail.
Any advice and info on this chip?
-
January 8th, 2001, 01:17 AM
#2
What motherboard are you using. Try updating the Bios. My friend had the same problem once with it shutting down with one operating system, but being fine with another.
-
January 9th, 2001, 01:18 AM
#3
Remove and reapply thermal compound/grease on the heatsink fan and processor?
-
January 10th, 2001, 08:11 AM
#4
Try a new heatsink/fan. If it was an OEM processor then it probably is junk. Try this web site www.3dcool.com. They have some real nice cooling products, which would also allow for some overclocking.
-
January 10th, 2001, 08:50 AM
#5
Try a new heatsink/fan. If it was an OEM processor then it probably is junk. Try this web site www.3dcool.com. They have some real nice cooling products, which would also allow for some overclocking.
-
January 10th, 2001, 03:41 PM
#6
Viper! You're wonderful!
I just called 3dcool and I'm getting a powersupply and heatsink shipped via ups tomorrow.
Great price, I bought a 431 watt PS for only $165.00 and shipping via UPS is $5.90.
Pardon the plug, I just wanted to let people know that it looked like a great site.
Thanks!
------------------
Sarchasm: The gulf between the author of sarcastic wit, and
the recipient who doesn't get it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks